Filter
Top Products
19
CONTROLS
MOWER DECK CUT HEIGHT LIFT LEVER:
•Located to the right and front of
operator.
•Controls the cutting height.
•Seven positions of adjustment.
•Depress trigger and move lever forward
to lower deck.
•Depress trigger and pull lever back to
raise deck.
NOTE: Always use high position for transport.
BLADE DRIVE:
•Located on control panel to
operators right.
To engage blade: Pull up on switch.
To disengage blade: Push down.
CIRCUIT BREAKER:
•Located on control panel to
operators right.
•Protection of the electrical system
is by (1) 15 amp circuit breaker.
•If circuit breaker trips, push button
to reset.
•If this condition repeats, consult
dealer for inspection and repair.