Filter
Top Products
29Page
BELT TENSION
ENGINE TO MOWER DECK BELT:
42' and 50" P/N 6111
60" P/N 6938
The engine to mower deck drive belts are automatically held in proper tension by springs
which push the deck assembly forward and do not require any additional adjustment to be
made.
MOWER DECK SERPENTINE BELT:
42" P/N 6109
50" P/N 1300
60" P/N 6939
Refer to illustration for adjustment procedure.
NOTE: Belt deflection or movement should be approximately 1/4" when measured at
mid-point between pulleys.
Periodically inspect both belt and idler systems.
CARE AND MAINTENANCE
TIGHTEN OR LOOSEN
HEX NUT TO ACHIEVE
THIS DIMENSION
50" & 60" 5/8"
42" 3/4"