Filter
Top Products
Page 22
OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS: Cold Engine
1. Position choke control in ON position.
2. Position throttle control at 1/2 speed setting.
3. Insert ignition key and turn to "Start" position.
When engine starts, release ignition key.
Key will return to "Run" position.
4. Once engine starts to warm up, slowly move
choke control to OFF position.
5. Move throttle control to the FAST position
for actual operation of the mower deck.
6. Engine must be operated with throttle control
in the FAST position, or maximum setting to
insure adequate lubrication and cooling of the
engine, and cut quality of the mower deck.
STARTING INSTRUCTIONS: Engine has been operated.
1. Move throttle control to 1/4 to 1/2 setting.
2. Insert ignition key and turn to "Start" position. When engine starts, release ignition key.
Key will return to "Run" position.
3. Move throttle control to FAST position for actual operation of the mower deck.
NOTE: Model ZTR 5022 may require partial choke setting to start even if the engine has
been operated for a period of time.
4. Engine must be operated with throttle control in the FAST position, or maximum setting
to insure adequate lubrication and cooling of the engine, and cut quality of the mower
deck.
CAUTION DO NOT operate the engine in an enclosed area. The exhaust fumes are toxic.