Filter
Top Products
49
CARE AND MAINTENANCE
REAR WHEELS:
The rear wheels of all 5000 Series models are of an
offset center design to allow reversed installation
for using snow chains or to gain increased stability
when mowing on sloped ground.
Slopes are a major factor related to loss-of-control and
tip-over accidents, which can result in severe injury or
death. All slopes require extra caution. If you cannot
back up the slope or if you feel uneasy on it, do not
mow it.
WHEEL REVERSAL:
*Installation instructions marked with an * asterisk are
particularly important.
1. Raise rear of mower and place suitable supports
at the rear of the chassis.
2. Remove rear wheel lug nuts and rear wheels.
3. Reinstall rear wheels with valve stems inward.
4. Install lug nuts.
5. *Tighten lug nuts to a minimum torque factor
of 50 ft. lbs.