Dixon ZTR 5004 Lawn Mower User Manual


 
38
Hex Head Valve Stem
Hot oil may cause burns. Allow
engine to cool before draining oil.
CAUTION
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1. The Dapco oil drain valve is located on the right
side of the engine crankcase on the 5004 &
5005 and on the left side of the engine crank-
case on the 5023.
2. Place a suitable container under the drain valve.
The fitting of a short piece of hose will help direct
the oil.
3. To drain, turn hex head valve stem counter--
clockwise with 10mm wrench or socket. Open
to full open (approximately 7 turns).
4. After engine is drained, tighten hex stem.
NOTE: Refer to engine manufacturers recommendations
for frequency of oil changes.