Filter
Top Products
Page 28
CARE AND MAINTENANCE
CAUTION
HOT oil may cause burns. Allow engine to cool before draining
oil.
CHANGING THE ENGINE OIL:
1. The "snap lock" oil drain valve is located
on the left side of the engine crankcase
on the Briggs & Stratton, and the right
side of the Kohler.
2. Place a suitable container under the drain
valve. The fitting of a short piece of hose
to the valve will help direct the oil.
3.
Push
the valve body in and
twist
to clear
the detent notch.
4.
Pulling
the valve body outward will start
the flow of oil.
NOTE: Refer to engine manufacturers
recommendations for frequency of oil
changes.
•Replace filter each time the oil is changed.
•These filters can be obtained from your authorized engine dealer.
•The use of any other oil filter may cause damage to the engine.
Briggs & Stratton Oil Filter: Kohler Oil Filter:
P/N 492 932 P/N 52 050 02
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
OIL FILTERS: