Dixon 44, 44, 44, 36, 36, 42, 42 Lawn Mower User Manual


 
DIXON-43
MAINTENANCE
Pump Belt
Replacing EZT (E-Series Zeroturn Transaxle) belt
Park the mower on a level surface. Engage the
parking brake.
EZT belt removal
NOTE: Be careful not to damage the fan blades on
the EZT´s as this can affect cooling or damage the
EZT´s
Remove the deck belt (see Deck Belt Removal
in this section of the manual).
Create slack in the belt by removing the spring
on the pump idler arm.
The belt should now be able to be removed
from the engine pulley and EZT pulleys.
Belt installation
Wrap the EZT belt around the EZT pulleys
Route the belt around the inside of the idler
pulley.
Wrap the belt around the engine pulley.
Reattach the spring on the pump idler arm.
Install clutch on to engine shaft (pulley side
down) make sure key is installed and align
the clutch anti rotation tab into slot on clutch.
Secure clutch, install wire.
Reinstall the deck belt onto the electric clutch
belt (see Deck Belt Removal in this section of
the manual).