Filter
Top Products
DIXON-41
MAINTENANCE
Tire Pressures
All four tires should have a pressure of
15 psi / 103 kPa /1 bar.
8050-824
Adjusting belt tension
Tension
Eyebolt
WARNING!
Faulty adjustment can cause an
accident.
WARNING!
The machine must be standing
absolutely still when the park
brake is engaged.
V-belts
Deck belt
Inspect every 50 hours of operation. Check for severe
cracking and large nicks.
NOTE: The belt will show some small cracks in normal
operation.
Belt tension is manually adjustable. Turn bolt on deck
eyebolt to adjustment tension.
NOTE: Belt deection or movement should be
approximately ¼”(6mm) when measured at midpoint
between pulleys. Periodically inspect both belt and
idler systems.
8050-823
Engaged parking brake
8011-564
Check tire pressure
Parking Brake
Visually check that no damage is found on the lever,
linages, or switch belonging to the parking brake.
Perform a stand still test and check that there is a
braking action.
To adjust the parking brake, contact the Dixon service
workshop.