Filter
Top Products
CARE AND MAINTENANCE
47
ELECTRICAL SYSTEMS
Keep all connections clean and tight.
CLEANING THE MOWER
Wash mower periodically. Clean above and below deck.
High pressure washing and alkaline based soaps can cause
damage to bearings and other parts of the mower. After washing
your mower, start the engine and engage the mower deck for a few
minutes to disperse any water that may have accumulated in
bearings, pulleys or fans.
Note: Allow mower to cool before washing. If bearings are hot,
they will draw moisture inside as they dry and cause
corrosion.
SERIAL NUMBERS
The serial number is located on frame at rear of engine.
WARRANTY
Refer to warranty information.
PARTS/SERVICE
See your Dixon dealer for replacement parts, warranty or service.