Filter
Top Products
CONTROLS
25
PARK BRAKE
The park brake is designed to hold the mower from
moving and is not intended for use in stopping the
mower while it is in motion. The engine will stop if the
park brake is engaged while the control levers are in
the drive position.
TO SET PARK BRAKE
The hand-operated park brake is located on the left
hand side.
•To engage brake, pull lever up (to the rear).
•To release brake, move lever forward (down).
NOTE: Always set park brake before dismounting.
Release park brake before moving mower.
CAUTION
!
Engage park brake before
starting engine.