Filter
Top Products
BLADE DRIVE SWITCH TEST:
a) Put parking brake in ON position.
b) Swing control levers OUT.
c) Engage blade drive.
d) Turn ignition switch to START.
Engine should not turn over or
attempt to start.
SEAT SWITCH TEST:
a)In a SAFE AREA away from bystanders,
start the engine.
b)Leave levers swung OUT and parking
brake OFF.
c) Engage blade drive.
d)Raise slightly off seat.
ENGINE SHOULD STOP!
NOTE:
If Any Safety Check FAILS, Do Not Operate The Mower until
the system has been checked and repaired by an
Authorized Dixon Dealer.
25
TESTING OF SAFETY INTERLOCK
SYSTEMS:
OPERATION INSTRUCTIONS