Filter
Top Products
LUBRICATION
50-Dixon
IMPORTANT INFORMATION
Used engine oil is a health hazard and
must not be disposed of on the ground or
in nature; it should always be disposed
of at a workshop or appropriate disposal
location.
Avoid skin contact; wash with soap and
water in case of spills.
WARNING!
Engine oil can be very hot
if it is drained directly after
stopping the engine. Allow
the engine to cool to a safe
temperature rst.
Engine Oil
Engine Oil Filter
Drain the engine oil in accordance with the •
work description under the heading Engine
Oil/Change Engine Oil.
Remove the oil lter. If necessary, use a •
lter remover.
Wipe new, clean engine oil onto the seal •
for the new lter.
Mount the lter by hand with +¾ turn.•
Run the engine warm, then check that •
there are no leaks around the oil lter seal.
Check the oil level in the engine, ll •
if necessary. The oil lter holds 0.1 qt (0.1
liters) of oil.
Changing the oil lter
8011-734
Deck outer spindle
Lubricate using a grease gun, one zerk, each side 2-3
strokes. Use only good quality bearing grease.
8011-733
Deck outer spindle (with belt shield removed)