Filter
Top Products
OPERATION
26-Dixon
8061-019
Parking brake not activated
Before Starting
Read the sections Safety Instructions and •
Controls before starting the machine.
Perform the daily maintenance before •
starting (see Maintenance Schedule in the
Maintenance section).
Check that there is sufcient fuel in the fuel •
tank.
Adjust the seat to the desired position.•
The following conditions must be fullled before the
engine can be started:
The driver must be seated on the seat.•
The blade switch for engaging the mower •
blades must be depressed.
The parking brake must be on.•
Both steering controls must be in the locked •
(outer) neutral position.
Starting the Engine
Sit on the seat. 1.
Raise the mower deck by pulling the lifting 2.
lever backward to the locked position
(transport position).
Activate the parking brake.3.
Disengage the mower blades by pressing the blade
switch downwards.
8050-117
The mower deck’s lifting lever
8011-441
Hour meter
THROTTLE
CHOKE
ON
OFF
BLADES