Filter
Top Products
CARE AND MAINTENANCE
36
Hex Head Valve Stem
—Fig. 9—
CHANGING THE ENGINE OIL:
1. The “Dapco” oil drain valve is located on the left side
of the engine crankcase.
2. Place a suitable container under the drain valve
hose.
3. To drain, turn hex head valve stem counter-
clockwise with a 10mm wrench or socket. (See Fig.
9) Open to full open (approximately 7 turns).
4. After engine is drained, tighten hex stem.
5. Change oil filter.
6. Fill with oil (see steps on next page).
NOTE: Refer to engine manufacturer’s recommendations for
frequency of oil changes.
CAUTION
HOT oil may cause burns. Allow engine to
cool before draining oil.
!