Filter
Top Products
12 - Husqvarna
ASSEMBLY
MIDDLE CHUTE
BLOWER ASSEMBLY
MIDDLE CHUTE
1. Place middle chute over the top end of the blower
assembly.
2. Latch middle chute to blower assembly.
BELT COVERS
Place the deck belt shield on the deck over the 1.
drive pulley and secure with hardware removed
from steel belt shield.
Place retainer on the outer pulley cover.2.
Align the tab end of the belt cover into the slot on 3.
the deck belt shield and the other end over the end
of the outer pulley cover.
Secure with knob.4.
Retainer
Knob
Outer Pulley Cover
Deck Belt Shield
Belt Cover Tab
Middle Chute Latch