Filter
Top Products
Husqvarna - 11
ASSEMBLY
BLOWER ASSEMBLY
Position blower over the discharge tabs on the 1.
deck and set blower onto the deck.
Besuretheblowerissittingushagainstthe2.
outside of the deck.
Secure the mount bracket to the deck with the pin 3.
and hairpin cotter supplied with the kit.
Mount Bracket
Pin
Discharge Tab
DRIVE BELT
Make sure the tension release lever is forward or 1.
disengaged.
Place the belt over the pulley on the deck. Refer to 2.
illustration for proper routing.
Move the tension release arm to the rear and 3.
engage in the latch.
Rear Of Deck Idler Pulleys
Outer Pulley
Twist in Belt
Tension Release Arm