Filter
Top Products
OpERATION
29
Running
Release the parking brake by moving the lever 1.
downward.
Your mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without rst setting the parking brake will shut
off the engine.
Move the steering controls to the neutral 2.
position (N).
IMPORTANT INFORMATION
The mower deck’s anti-scalp rollers should be
evenly adjusted.
8058-080
Released parking brake
WARNING!
Ensure that no one is near mower
when engaging blade switch. Make
sure the work area is free from objects
that could be thrown by the rotating
blades.
Set retaining pin into selected cutting height and 3.
secure the opposite side with a cotter hairpin.
Push the release button on the cutting height lever 4.
and move lever to the pin, release the button.
Set the cutting height with the cutting height 5.
adjustment lever.
Engage the mower deck by pulling out the 6.
blade switch.
8058-024
Secure selected cutting height
8058-019
Mower deck lifting lever