Filter
Top Products
WARNING!
The machine can turn very rapidly if
one steering control is moved much
further forward than the other.
CONTROLS
18
Motion Control Levers
The machine’s speed and direction are continuously
variable using the two steering controls. The steering
controls can be moved forward or backward about
a neutral position. Furthermore, there is a neutral
position, which is locked if the steering controls are
moved outward.
When both controls are in the neutral position (N), the
machine stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the neutral
position. The rotation of the right wheel is reduced and
the machine turns to the right.
Zero turn can be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. The rotation direction when zero
turning is determined by which steering control is
moved backward behind the neutral position.
If the left steering control is pulled backward, the
machine turns to the left. Use extra care when using
this maneuver.
If the steering controls are in uneven positions when
standing still or do not t in the slots for moving the
controls outward, they can be adjusted
8050-846
Forward1.
Neutral2.
Neutral slot, Neutral lock3.
Reverse4.
Motion control lever pattern (right side)
8050-833
Steering controls