Filter
Top Products
33
CARE AND MAINTENANCE
ELECTRICAL SYSTEMS:
Keep all connections clean and tight.
CLEANING THE MOWER:
Wash mower periodically. Clean above and below the
deck.
High pressure washing and alkaline based soaps can
cause damage to bearings and other parts of the mower.
After washing your mower, start the engine and engage
the mower deck for a few minutes to disperse any water
that may have accumulated in bearings, pulleys or fans.
Note: Allow mower to cool before washing. If bearings
are hot, they will draw moisture inside as they dry and
cause corrosion.
SERIAL NUMBERS:
The serial number is located on the frame at the rear of
the engine.
WARRANTY:
See information on Page 13 of this manual, or refer to
the Warranty Registration Form in your Owner’s Pack.
PARTS AND SERVICE:
See your Dixon Dealer for replacement parts, warranty or
service.