Filter
Top Products
23
OPERATION INSTRUCTIONS
BLADE DRIVE SWITCH TEST
(ELECTRIC CLUTCH):
1. With the electric blade drive switch turned on and
the parking brake in “ON” position, engine should not
turn over or attempt to start when key switch is
moved to the start position.
2. In a safe area, away from bystanders, start the
engine, place throttle setting at maximum or full.
Engage the blade drive through the electric clutch
switch. Raise weight slightly off of seat.
ENGINE
SHOULD STOP.
3. If any Safety Check fails, do not operate the mower
until the system has been checked and repaired by
an authorized Dixon ZTR dealer.