Filter
Top Products
10
7
FRONT WEIGHTS
1. Center the weight box on the front face of foot
plate, as illustrated. Use the holes in weight box
as a template to mark and drill four
11
/32" diameter
holes in foot plate.
2. Attach the weight box to foot plate with four
5
/16-18 x ½" carriage bolts and
5
/16" nyloc nuts.
3. Install weight in weight box.
CAUTION
DO NOT operate mower with grass bagger,
unless the front weights are installed.
Install Weight
In Box
Weight Box
ASSEMBLY
6
UPPER CHUTE
1. Attached flex tube to blower and secure with the
hose clamp.
2. Slide opposite flex hose end into upper chute.
3. Push upper chute through the gasketed opening
in the cover assembly.
4. Rotate flex tube and upper chute so that the
chute opening is downwards toward the container
bags.
Cover Gasket
Rotate Upper Chute
to point downwards
towards bags