Filter
Top Products
WARRANTY POLICY Page 4
Warranty Policy:
Each new Model 501 is warranted against manufacturing defects in material and
workmanship under normal use and service for a period of (1) year or (400)
hours from date of purchase and is extended to the original retail purchaser
of the mower only.
Obligation:
Under this warranty policy Dixon Industries, Inc. shall be limited to the
replacement to the original purchaser of any part or parts, which, within
the warranty period shall be shown to be defective due to faulty workmanship or
materials at the factory.
What is NOT covered by Dixon Industries, Inc.:
1. TRANSPORTATION CHARGES: Any charges by the dealer or other parties for
transportation of the mower to or from the dealers place of business, also
known as pick up and delivery.
2. ENGINES: The warranty policy and procedures for any engine used on our
mowers is the responsibility and obligation of the individual engine
manufacturer. As such, Dixon Industries, Inc. assumes no responsibility for
either the policies or procedures of said manufacturers.
3. BELTS AND BLADES: Our warranty does not apply to the blades or belts used
on our mowers due to the very nature of the function they perform and to h
the elements they are exposed to.
4. ROUTINE MAINTENANCE: Adjustments or any type of oil or grease used on the
mower.
5. TIRES: Warranty extended by tire manufacturer.
6. PEERLESS GEAR BOX: Warranted for a period of (90) days from date of
purchase of Tecumseh Products Company.
7. NEGLIGENCE: Any failure caused by negligence, improper use or abuse on part
of owner or operator.
Who is authorized to perform warranty service?
Any authorized Dixon ZTR dealer can perform repairs under warranty on our
mowers. If warranty repairs" are needed, please contact the selling dealer
first. If, due to circumstances beyond your control, you are unable to
obtain repairs by the selling dealer, contact the customer service
department of Dixon Industries, Inc. for assistance.
Product updates or improvements:
We reserve the right to make changes in design or improvements on our
products without imposing any obligation upon ourselves to install the same
on products heretofore manufactured.