Filter
Top Products
Page 22
TROUBLE SHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any multi blade
mower. Type and condition of grass, ground speed, blade speed, and conditions
are some of the variables that interact creating differences in cut quality
results. In most cases, a smooth, even cut will be achieved without further
adjustment.
The Trouble Shooting Chart suggests practices and adjustments that may be
helpful in improving cut quality. Your Dixon ZTR Dealer is also available to
provide assistance to you.
SITUATION CAUSES REMEDY
Poor cut quality Ground speed Reduce mowing speed
Poor cut quality Loose belts Adjust per operators
manual
Poor cut quality Engine RPM too low Increase engine RPM to
Poor cut quality Dull or bent blades Sharpen or replace as
required
Poor cut quality Unlevel mower deck Adjust per operators
manual
Poor cut quality Grass build-up under Clean out underside of
Mower deck mower deck
Poor cut quality Improper blades
Replace with original
equipment blades which are
designed for the Model 501
Poor cut quality
Uneven tire pressures
Check and adjust as
required per operators manual