Dixon 42 / 968999689 Brush Cutter User Manual


 
English-41
Checking Tire Pressures
All four tires should have a pressure of
15 psi / 103 kPa /1 bar.
Checking the Parking Brake
Visually check that no damage is found on the lever,
linages, or switch belonging to the parking brake.
Perform a stand still test and check that there is a
braking action.
To adjust the parking brake, contact the Dixon service
workshop.
Checking the V-belts
Deck belt
Inspect every 50 hours of operation. Check for severe
cracking and large nicks.
NOTE: The belt will show some small cracks in
normal operation.
Belt tension is manually adjustable. Turn bolt on deck
eyebolt to adjustment tension.
NOTE: Belt deflection or movement should be
approximately ¼"(6mm) when measured at
midpoint between pulleys. Periodically inspect both
belt and idler systems.
Remove dust
8009-181
Parking brake engaged
8050-773
WARNING!
Faulty adjustment can cause
an accident.
Adjusting belt tension
Tension
Eyebolt
WARNING!
The machine must be
standing absolutely still when
the park brake is engaged.
MAINTENANCE