Dixon 42 / 968999689 Brush Cutter User Manual


 
CONTROLS
English-19
Seat adjustment
8050-165
2. Seat adjustment lever
The seat can be adjusted lengthways. When making
adjustments, sit on the seat. Slide the lever to the side
and maneuver seat to appropriate placement and
release lever.
3. Unlocking Transmission
When pushing or pulling the mower, be sure to engage
the IZT (Integrated Zeroturn Transaxle) bypass
linkages.
Always turn off engine before engaging or
disengaging the hydro release (free wheel)
lever. Never attempt to move the lever with
the engine running.
Lift the seat to access release levers. Push
the hydro release levers toward the rear of
the machine and inward until notches lock in
place on frame. Release park brake.
To engage the transmissions, move the
release levers outward so they return to
normal position.
Bypass linkages
8050-767
IMPORTANT INFORMATION
Before pushing or towing tractor,
transmission must be unlocked and park
brake released. The tractor should never
be pulled at more than 2 miles per hour
(3.2 km/h) or for distances over ¼ mile
(.402 km). Trailer the unit for distances
over ¼ mile.
Push lever in and
lock notch on frame
(2 places)