Dixon 36 / 968999609 Brush Cutter User Manual


 
English-44
Blade replacement
Remove blade bolt by turning
counterclockwise.
Install new or re-sharpened blade with
stamped “GRASS SIDE” facing towards
ground/grass (down) or “THIS SIDE UP”
facing deck and cutter housing.
Install and tighten blade bolt securely.Torque
blade bolt to 27-35 ft/lb (35-45 Nm).
WARNING!
Blades are sharp. Protect
your hands with gloves and/or
wrap blades with a heavy
cloth when handling.
1. Blade
2. Center hole
3. Cutter housing
4. Blade bolt
5. Lockwasher
Blade attachment
8050-802
1
3
4
5
2
IMPORTANT INFORMATION
Special blade bolt is heat treated.
Replace with a Husqvarna bolt if required.
Do not use lower grade hardware than
specified.
MAINTENANCE