Dixon 36 / 968999609 Brush Cutter User Manual


 
English-33
OPERATION
Moving by Hand
Unlocking Transmission
When pushing or pulling the mower, be sure to engage
the IZT (Integrated Zeroturn Transaxle) bypass
linkages.
Always turn off engine before engaging or
disengaging the hydro release (free wheel)
lever. Never attempt to move the lever with
the engine running.
Lift the seat to access release levers. Push
the hydro release levers toward the rear of
the machine and inward until notches lock in
place on frame. Release park brake.
To engage the transmissions, move the
release levers outward so they return to
normal position
WARNING!
Make no adjustments without:
the engine stopped
the ignition key removed
the parking brake activated
Bypass linkages
8050-767
Push lever in and
lock notch on frame
(2 places)