Filter
Top Products
Page 33
SITUATION CAUSES REMEDY
Poor cut quality Ground speed too fast Reduce mowing speed
Poor cut quality Incorrect engine to Install correct belt P/N 7725
mower deck belt
Poor cut quality Engine RPM too low Increase engine RPM to maximum
Poor cut quality Dull or bent blade Sharpen or replace as required
Poor cut quality Un-level mower deck Refer to page 24
Poor cut quality Grass buildup under Clean out underside of mower deck
mower deck
Poor cut quality Improper blades Replace with original equipment
blade designed for the 4000 Series
Models Refer to page 30
Poor cut quality Uneven tire pressures Check and adjust as required per
operators manual
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and conditions of grass,
cut height setting, engine RPM and ground speed are some of the variables that interact creating
differences in cut quality. Examination of one or more of the above will generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving cut
quality. Your Dixon ZTR dealer is also available to provide assistance to you.
TROUBLESHOOTING