Filter
Top Products
Page 25
CARE AND MAINTENANCE
BELT TENSION
TRANSAXLE DRIVE BELT: P/N 7650
No adjustment required.
ENGINE TO MOWER DECK BELT: P/N 7725
No adjustment required.
Correct belt tension is maintained through a fixed engine location and a
spring loaded idler system.
A pulsing movement of the belt idler will be observed both during engagement
of the electric blade clutch and actual operation of the mower deck.
NOTE: Engagement of the electric blade clutch switch may produce a sharp
high pitched chirp or squeal as the belt tension loading is absorbed
by the idler system. This is normal and not a sign of failure.
MOWER DECK SERPENTINE BELT: P/N 6109
Refer to illustration for adjustment procedure.
Idler Weldment
"L" Rod
Idler Shock Mount
Hex
Nut
3
4
Tighten or Loosen
Hex Nut to achieve
this Dimension