Filter
Top Products
45
TROUBLESHOOTING
6. ENGINE RUNS BUT MOWER WONT MOVE FORWARD
Drive belt broken or slipping- - - - - - - - - - - - - - - - - - - replace drive belt
Transmission damage- - - - - - - - - - - - - - - - - - - - - - - - - consult dealer
7. MOWER LOSES POWER OR TRANSMISSION OVERHEATS
Engine air filter-- - - - - - - - - - - - - - - - - - - - - - - - - - - - -clean or replace
Transmission damage- - - - - - - - - - - - - - - - - - - - - - - - -consult dealer
8. ENGINE STALLS WHEN BLADES ARE ENGAGED
Operator not on seat- - - - - - - - - - - - - - - - - - - - - - - - - - - - sit on seat
Faulty interlock system- - - - - - - - - - - - - - - - - - - - - - - - consult dealer
Bad blade spindle bearing - - - - - - - - - - - - - - - - - - - - - consult dealer
Deck drive belt not properly routed- - - - - - - - - - - - - - - - - - - - reroute
Blades blocked by foreign material - - - - - - - - - - - - - -clean under deck
9. DRIVE SYSTEM
Low on power- - - - - - - - - - - - - - - - - - - - - - - - - - - - check belt tension
Mower pulls to side - - - - - - - - - - - check tire inflation/consult dealer
Mower creeps in neutral- - - - - - - - - - - - - - - - - - - - - - - -consult dealer
10. CUT QUALITY
Skips in spots- - - - - - - - - - - - check for loose belt/slow ground speed
Cut uneven left to right - - - - - - - - -check tire inflation/level the deck
Poor dispersal of grass- - - - - - - - - - -clean deck/check for loose belt
Ends of grass blades are ragged- - - - - - - - - - - - - - - - sharpen blades