Filter
Top Products
32
CARE AND MAINTENANCE
CUTTER BLADE MAINTENANCE:
CAUTION Stop engine and remove ignition key for
safety. Wear heavy, thick gloves when
holding onto cutter blade, avoid the sharp
edge of the blade.
Blades should be discarded when worn excessively.
DANGEROUS!
DO NOT USE
BLADE IN THIS
CONDITION!
When notch starts,
discard blade
New Blade
Check sharpness of mower blades after every 10 hours of
operation. Observe proper blade position prior to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade nut and remove
blade.
4. When replacing blade, tighten
blade nut securely. Refer to
diagram. Be sure blade is
centered on pilot before
tightening nut to 60 ft. lbs.