Filter
Top Products
22
OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS (4515 & 4516):
1. Parking brake must be on, control levers swung out,
and blade drive disengaged.
2. Move throttle control to choke position if engine is cold,
full throttle if warm.
3. Insert ignition key and turn to start position. When
engine starts, release ignition key. Key will return to
run position.
4. Move throttle from choke to desired speed position.
5. Release parking brake.
6. Swing levers in.
7. Operate the mower per the CONTROL instructions on
Page 15.
CAUTION Do not operate the engine in an enclosed area
due to the harmful exhaust gas produced.
Note: When mowing, blade(s) engaged, throttle control must be set to
the MAXIMUM or wide open setting to insure adequate cooling of
the engine and to maintain mower deck blade speed.
CAUTION Engage parking brake before starting engine.