Filter
Top Products
30
With the brake handle in the release position, remove
the cotter pin from the castle nut. Insert a 0.010
feeler gauge between the brake disc and the brake
puck. Tighten the castle nut with the feeler gauge
inserted until the gauge fits snugly between the disc
and puck. The gap should not be so tight that the feeler
gauge cannot be reinserted after removal. Back the
castle nut to the closest pin hole and reinsert the
cotter pin. Repeat for other side. See picture below.
CARE AND MAINTENANCE
PARKING BRAKE ADJUSTMENT
COTTER PIN
0.10 GAP BETWEEN BRAKE DISC AND
CASTLE NUT