Filter
Top Products
33
CARE AND MAINTENANCE
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
BefBef
BefBef
Bef
ore perfore perf
ore perfore perf
ore perf
oror
oror
or
ming anming an
ming anming an
ming an
y maintenancey maintenance
y maintenancey maintenance
y maintenance
, tur, tur
, tur, tur
, tur
n off enginen off engine
n off enginen off engine
n off engine
,,
,,
,
allow to cool & remoallow to cool & remo
allow to cool & remoallow to cool & remo
allow to cool & remo
ve keyve key
ve keyve key
ve key
..
..
.
Use extreme care when working on machinerUse extreme care when working on machiner
Use extreme care when working on machinerUse extreme care when working on machiner
Use extreme care when working on machiner
yy
yy
y
..
..
.
Do not wear waDo not wear wa
Do not wear waDo not wear wa
Do not wear wa
tch or jewelrtch or jewelr
tch or jewelrtch or jewelr
tch or jewelr
yy
yy
y
. Do not wear loose f. Do not wear loose f
. Do not wear loose f. Do not wear loose f
. Do not wear loose f
itting clothesitting clothes
itting clothesitting clothes
itting clothes
,,
,,
,
and obserand obser
and obserand obser
and obser
ve all common safety practices with toolsve all common safety practices with tools
ve all common safety practices with toolsve all common safety practices with tools
ve all common safety practices with tools
..
..
.
MAINTENANCE SCHEDULE
•Adjust traction drive idler........................................after 5 hours break-in
•Check deck serpentine belt...........................................after 20 hours break-in
(adjust bumper to approximately 1/2” thick)
•Check crankcase oil level..........................................................before each use
•Clean grass from hydrostat fans...........................................before each use
•Clean grass & debris from muffler & manifold area..........before each use
•Clean grass under deck...............................................................after each use
•Check tire pressure......................................................................every 10 hours
•Inspect blades for sharpness......................................................every 10 hours
•Check hydrostatic transmission fluid...........................................every 25 hours
•Clean air filter element....................................................................every 25 hours
•Check traction drive idler adjustment................................every 50 hours (see page 48)
•Grease all zerks.....................................................................................every 50 hours
•Check all belts..........................................................................................every 50 hours
•Change engine crankcase oil and filter...........(5 hours break-in) every 50 hours
•Replace air filter elements..........................................annually or every 100 hours
•Replace spark plugs.....................................................annually or every 100 hours
•Change hydrostat oil and oil filter................(100 hours break-in) every 500 hours