Dixon 115 150227 Lawn Mower User Manual


  Open as PDF
of 15
 
8
ASSEMBLY
For the collection system to operate properly you will
need to replace the cutting blades on your unit with
thehighliftbladesinthekit.
1. Removemowerdeckfrommachine.Referto
Operator’s Manual, if necessary.
2. Removestandardmowerbladesfromdeckand
installhighliftbladesprovidedtomowerdeck.
Individual preferences may vary, depending on
mowing conditions and on the type and heaviness
of grass to be bagged.
NOTE:Therearetwodifferenttypesofhighlift
bladeswiththegrasscatcher.Thebladewith
highestliftshouldbeputonhubnearestthe
dischargeopening.Thebladewiththelowerlift
shouldbeputonthetrimsidehub.
3. Installrearbafebyaligningwithholesatrear
ofdischargechute.Frominsidedeck,install
¼-20x¾"boltthroughslottedholeinbafeand
extendthroughdeckwall.Attach¼washerand
¼-20 nyloc nut. Install
5
/16-18 x ¾" carriage bolt in
square hole in the same manner and attach
5
/16
washer and
5
/16-18nylocnut.Liftbafetotopof
slot and tighten hardware.
4. Spinmowerbladeseveraltimestocheckfor
sufcientclearance.CONTACTBETWEEN
BLADE AND BAFFLES MAY RESULT IN
SERIOUS INJURY.
REAR BAFFLE
TOP VIEW OF DECK
1. Reinstalldecktomachine.RefertoOperator’s
Manual, if necessary.
2. Removegrassdeectorfrommowerdeckby
pullinghairpincotteranddeectorpin.
3. Positiondischargeadapterassemblyondeck.
Rundeectorpinthroughthedeectorspringand
themountingbracketsonthedeectorandmower
deck.Slipspringendthroughlockslotonthe
deectormouningbracket.Securedeectorpin
with hairpin cotter.
DeectorPin
Hair Pin Cotter
MoverDeck
8059-048
DeectorSpring
LockSlot
1
CHANGING BLADES
2
DISCHARGE ADAPTER
WARNING
Blades are sharp. Protect your hands
with gloves and/or wrap blades with a
heavy cloth when handling.
 previous next