Filter
Top Products
12
• Check balance of blade. See instructions
for blade balancing.
• After blade is sharpened and balanced
replace blade on mower and tighten
securely.
Blade
Vise
Sharpen this
edge on
both ends
of blade
Fine
Tooth
File
GENERAL RECOMMENDATIONS
• Always observe safety rules when
performing any maintenance.
• The warranty on this lawn mower does
not cover items that have been
subjected to operator abuse or
negligence. To receive full value from the
warranty, operator must maintain mower
as instructed in this manual.
• Once a year check blade for wear.
• Follow the maintenance schedule in this
manual.
• Before each use check for loose
fasteners.
LUBRICATION
No lubrication is required.
IMPORTANT: Do not oil or grease plastic
wheel bearings. Viscous lubricants will
attract dust and dirt and will shorten the
life of the self-lubricating bearings. If you
feel they must be lubricated, use only a
dry, powdered graphite tube lubricant
sparingly.
TIRES
• Keep tires free of gasoline, oil or insect
control chemicals which can harm
rubber.
• Avoid stumps, stones, deep ruts, sharp
objects and other hazards that may
cause tire damage.
MAINTENANCE
CUSTOMER RESPONSIBILITIES TABLE
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE SERVICE DATES
Check for Loose Fasteners
Clean Lawn Mower
Check/Sharpen/Replace Blade
BEFORE EACH USE
AFTER EACH USE
EVERY 10 HOURS
EVERY 25 HOURS
BEFORE STORAGE
4
4
4
4
4
TO BALANCE BLADE
• Check balance of blade by placing
center hole in blade over a nail or
screwdriver shank, clamped horizontally
in a vise. If either end of the blade
rotates downward, file that end. Blade is
properly balanced when neither end
drops.
598994-00,37051 8/9/05 10:17 AM Page 12