Filter
Top Products
8- ENG
D29382
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the
water supply.
Motor (located inside the shroud): Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun
and wand.
Spray Gun: Connects with wand to control water flow rate, direction, and
pressure.
Spray Wand With Variable Spray Nozzle: Spray nozzle adjusts from a narrow jet
stream to a fan jet spray. The spray can be adjusted by twisting the nozzle
clockwise and/or counterclockwise.
Rotary nozzle -increases cleaning efficiency by allowing you to cover more area
while using a concentrated spray pattern.
Cleaning Solution Application Unit - Used to apply cleaning solutions, see How
To Use Cleaning Solution Application Unit in this section.
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the
location of various controls and adjustments. Save this manual for future reference.
Motor
High
Pressure
Hose
Spray
Gun
Spray
Wand
with
Variable
Spray
Nozzle
High Pressure Pump
Electric
Cord
Water
outlet
Water
inlet with
filter
Quick-connect
Quick-connect adapter
Motor
ON-OFF
switch
Cleaning Solution
application unit
PRESSURE WASHER TERMINOLOGY
Ground Fault Circuit Interrupter Protection (GFCI): This washer is provided
with a ground fault circuit interrupter (GFCI) built into the plug of the power
supply cord. This device provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become necessary, use only
identical replacement parts that include GFCI protection.
Rotary Nozzle