Filter
Top Products
Figure 20. Opening a DDIC Drawer
1. Drawer latches (2 per drawer) 2. Drawer (2 per chassis)
CAUTION: If the SCv2080 operates for too long (depending on altitude) with drive drawers
open, the enclosure can overheat, causing potential drive failure and data loss. Such use may
invalidate the warranty.
3. Find the failed DDIC by the lit LED.
4. Press the release button to unlatch the DDIC.
5. Wait about ten (10) seconds for the drive to spin down.
6. Slide the DDIC up and out until it is free of the DDIC slot.
30
Replacing SCv2080 Components