Filter
Top Products
4. Flex the hard-drive bracket and remove the hard drive from the hard-drive bracket.
Installing the Hard Drive
1. Insert the hard drive into the hard-drive bracket.
2. Press the securing brackets inward and slide the hard-drive bracket into the bay.
3. Connect the data cable and the power cable to the back of the hard-drive.
4. Install the:
a) front bezel
b) cover
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) cover
b) front bezel
3. Perform the following steps as shown in the illustration:
a) Disconnect the data cable and the power cable from the back of the optical drive.
b) Slide and hold the optical-drive latch to unlock the optical drive [1].
c) Pull the optical drive out of the computer [2].
17