Filter
Top Products
Ex2900 / Ex3200 ATTACHMENTS
RB72 72” Rear Blade
The ½” steel A-frame is welded to two 4” x 4” steel beams with ¼” thick walls
that are fully reinforced. The rotation plate is constructed from 5/8” thick steel.
The 5 forward and 5 reverse positions allows for precise and consistent
grading. The angling plate is constructed from ¼” steel. The 4” outer tubes and
3.5” inner tube with ¼” thick walls are center cap welded. The 3-position tilt
adjustment provides a wide range of applications. The ¼” rolled moldboard is
attached by a ¼” mounting plate. The ½” x 6” cutting edge is hardened for long
life and reversible for even greater life expectancy.
LR60/LR72 Landscape Rake
The A-frame is constructed from ¼” steel welded to a 3” x 3-1/4” beam for
durability and precise control of the attachment. The rotation plate is
constructed from ½” steel. The 5 forward and 5 reverse positions add
versatility for a wide variety of chores. The superior construction of the ¾”
steel angle iron mounting plate gives rigid support to the tines. The hardened
tines are 5/16” x 1” and spaced 2” on center for a high resistance to wear and a
cleaner collection of material.
RT66 66” Tiller
Features a smooth manual shift; shifts out to 56” allowing for cleaner sight
lines when working close to objects or reaching under objects. Quick-adjust
skid shoes adjust up to a depth of 7-1/4” deep. Reinforced #80R lateral chain
drive has exceptional tensile strength. The ¼” steel wear plates on the chain
case allow it to be in contact with the soil while protecting it. High carbon rotor
shaft allows for deeper working depth and greater longevity of the rotor shaft.
Outwardly turned blades keep the rotor supports clean and maximize working
depth.
PHD200 Post Hole Digger
Heavy-duty, 2-7/8” x ¼” walled construction of the boom and 2-3/8” x ¼” wall
yoke allow for extra strength in all soil conditions. Grade 2 shear bolt provides
greater protection to the tractor drive and gearbox assembly. Reinforced
mounting collar with double flighting keeps the auger end from wearing out.
Hardened replaceable cutting knives allow for fast, clean digs and easy
maintenance. Dependable cast-iron gearbox with 540 RPM gives constant
digging power. Large 2” output shaft allows for long life in any soil condition.