Filter
Top Products
21
blade clutch switch “off”, release the parking brake and try
to start the engine. The engine should not start. If it does,
the parking brake switch must be repositioned or perhaps
replaced. If the engine does not start, engage the parking
brake and start the engine. Swing one steering lever up to
the operating position and the engine should stop. If the
engine does not stop, the parking brake switch must be
repositioned or replaced.
c.
Left and Right Steering Lever Switches:
Sit in the opera-
tor’s seat. With both steering levers opened-out in the neu-
tral position, the parking brake engaged and the blade
clutch switch “off”, swing the left steering lever up to the
operating position and try to start the engine. The engine
should not start. If it does, the left steering lever switch
must be repositioned or perhaps replaced. Open the left
steering lever to the neutral position and swing the right
steering lever up to the operating position and try to start
the engine. The engine should not start. If it does, the right
steering lever switch must be repositioned or perhaps
replaced. If the engine does not start, Open the right steer-
ing lever to the neutral position and start the engine. Swing
the left steering lever up to the operating position and the
engine should stop. If the engine does not stop, the left
steering lever switch must be repositioned or replaced.
Open the left steering lever out to the neutral position and
start the engine. Swing the right steering lever up to the
operating position and the engine should stop. If the engine
does not stop, the right steering lever switch must be repo-
sitioned or replaced.
d.
Seat Switch:
With both steering levers opened-out to the
neutral position, the parking brake engaged and the blade
clutch switch in the “off” position, start the engine. Now
release the parking brake, hold down on the back of the
operator’s seat against spring pressure, and swing one of
the steering levers up to the operating position. Release the
operator’s seat and the engine should stop. If the engine
does not stop, the seat switch must be replaced. With both
steering levers folded out in the neutral position, the park-
ing brake engaged and the blade clutch switch in the “off”
position, sit in the operator’s seat and start the engine. Turn
the blade clutch switch to the “on” position and the blades
should start to rotate. Raise up slightly off the operator’s
seat and the blades should stop. If the blades do not stop
when you dismount from the operator’s seat, the seat
switch must be replaced.
01004965.fm Page 21 Friday, March 23, 2001 9:17 AM