Filter
Top Products
The 3 spindle, center mounted, 38-, 44-, and 50-
inch rotary mowers are designed for use on
International Cub Cadet Tractors having serial
number 400,001 and higher, and are quick detach-
able by the use of two spring loaded handles and
two bayonet type hangers.
The three cutting blades are designed to create a
suction to lift the grass and hold it for an even cut.
Raising and lowering of the mower is done by
means of the tractor lift handle or the power lift.
The mower extends beyond the tractor wheels to
permit cutting close to shrubbery, trees, fences,
buildings, drive and walkway edges, etc.
The lift linkage provides and maintains a true par-
allel lift for the mower. The cutting height ranges
from approximately 1 to 4-inches, depending on
tire and mower combinations.
The mower is driven by a V-belt from the engine
mounted power take-off clutch. The clutch is
engaged and disengaged by means of a hand lever
mounted on the cowl pedestal.
Gauge wheels permit setting the cutting height to
allow the mower to follow the contour of the
ground and minimize ground scalping. The mower
front roller also aids in minimizing scalping.
A heavy-duty V-belt connects the three spindles
and permits independent turning of the blades
when an obstruction is struck by a blade. A spring-
loaded belt tightener maintains proper belt tension.
The lift linkage with mounting brackets can be
quickly detached by removing the quick-attachable
cotter pins and releasing the tractor quick hitch.
Keep the machine in good operating condition and
keep safety devices in place. Use guards or shields
as instructed.
The tapered discharge ch
protected opening for e
flow across the front of
clogging.
The blade spindle bearings are automotive type
double row ball bearings that can be relubricated
and are carefully enclosed and protected by seals.
47
ute
terminates at a large,
fficient air and material
the mower to minimize