Filter
Top Products
KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWER ATTACHMENT. Compare the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Shaft
Hanger
Air intake Opening
Blower Discharge
Opening
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach-
ments to be installed. The optional at-
tachments are:
Edger ............. 71-51157
Cultivator .......... 71-51158
Pruner ............ 71-51161
Brushcutter* ....... 71-51159
*not designed for use with electric
powerheads
WARNING: Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal-
ling attachments, place the unit on a
flat surface for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Coupler
Lower
Attachment
Upper Shaft
LOOSEN
TIGHTEN Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
Upper Shaft
Lower Attachment
3. While securely holding the upper
shaft, pull the attachment straight
out of the coupler.
-6-