Filter
Top Products
STEP 4: (SEE FIGURE 4)
* Assemble a shoulder bolt, large washer and 3/8" lock
nut to the frame brace and slotted hole on each side
of the bumper.
STEP 5: (SEE FIGURE 5)
* Fasten the frame braces to the tractor frame using
four 3/8-16 x 1" carriage bolts and 3/8" whizlock nuts.
NOTE: Only tractor frame shown for clarity.
FIGURE 4
3/8" LOCK NUT
\
\
LARGE
"_ SHOULDER WASHER
BOLT
3/8-16 x 1"
CARRIAGE
BOLT
s
LJ /
3/8" WHIZLOCK NUT ._
TRACTOR FRAME
FIGURE 5
TiLT BUMPER DOWN BEFORE RAiSiNG
TRACTOR HOOD: (SEE FIGURE 6)
* While pushing in lightly on top of bumper, pull latch
under front of bumper.
* Keep latch pulled out and pull down on bumper.
LOCK BUMPER iNTO UP POSiTiON: (SEE
FIGURE 6)
* Push bumper up into position. Latch will lock bumper
into place.
\
LATCH
FIGURE 6
©
Call 1-866-576-8388 for missing parts or assembly help 5
DO NOT RETURN TO STORE