Filter
Top Products
ATTACH GRASS CATCHER
;lose the flip lid. Flip lid must be closed
#hile operating lawn mower°
ift the rear door on the mower housing
,nd place the grass catcher frame onto
ne formed tabs on the rear door hinge
_rackeL
_he grass catcher is secured to the lawn
nower housing when the rear door is
owered onto the grass catcher frame.
..-__ _ Rear
_r'f _ door Grass
/ _ catcher
F_\ /flame
,ingeJ
brack
Formed
tabs
EMPTY GRASS CATCHER
-o remove grass catcher, release
_perator presence control bar to stop
;ngine.
_ift up rear door and remove the grass
:atcher by the handleo
)o not drag the bag when emptying; it
viii cause unnecessary wear.
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to be
used as a mulchero To convert to bagging
or discharging:
o Open rear door and remove mulcher
plate. Store mulcher plate in a safe
place.
o You can now install catcher' or optional
clipping deflector.
, To return to mulching operation, install
mulcher plate into discharge opening of
mower.
CAUTION: Do not run your lawn mower
without mulcher plate in place or approved
clipping deflector or grass catcher in place..
Never attempt to operate the lawn mower
with the rear door removed or propped
open.
Mulcher
BEFORE STARTING MOTOR
= Mower will not run with battery charger
plugged in.
= Unplug charger from outlet, then remove
charger from motor.
• Close charging port door..
TO START MOWER
o Insert fuse.
° Hold operator presence control bar
down to the handle and press switch
button to start mower.
= To STOP motor, release operator
presence control bar.
8