Craftsman 917.377631 Lawn Mower User Manual


 
The ()peration ofany lawn mower can result in
foreign objectsthrown intothe eyes, which can
resultin severe eye damage. Alwayswear
safety glasses or eye shieldswhile operating
your lawn mower or performingany adjust-
mentsor repairs. We recommend awide
visionsafety mask over the spectacles or
standardsafetyglasses.
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory for
optimum performance. Speed is notadjust-
able.
ENGINE ZONE CONTROL
CAUTION: Federal regulationsrequire an
engine controlto be installedon this lawn
mower in order to minimize'the riskofblade
contact injury.Do notunder any circu_
attempt to defeat the function of the operator
control.The blade tums when the engine is
running.
Your lawn mower is equipped with an
operator presence controlbar which
requiresthe operator tobe positioned
behind the lawn mOwer handle tostart and
operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Allfour wheals are adjusted by a single
lever.
Pull adjuster lever toward wheel. To raise
mower, move lever forward to desired
position.To lower mower, move the lever
toward the rear.
LowerWheels forhigh cut
\
Acluster
Lever
J
Raise Wheels for low cut
TO OPERATE DRIVE SYSTEM
To startforward motion, liftdrive controlbar
up to handle.
To stop forward motion, release drive
control bar.
IMPORTANT: Always keep drive controlbar
fully engaged against handle when in use.
Drive
Operator presence controlbar
controlbar--
To engage_'_ Drivecontrol
drive control desengaged
TO ATTACH GRASS CATCHER
Liftthe rear doorof the lawn mower and
place the grasscatcher frame hooksinto the
slotsof the rear door.
The grasscatcher issecured tothe lawn
mower housingwhen the rear door is
lowered onto the grass catcher frame.
CAUTION: Do not run your lawn mower
withoutclippingdeflectoror approved grass
catcher in place. Never attempt to operate the
lawn mower withthe rear door removed or
propped open.
Rear door
slots
Grass
handle
Catcher frame
hook
TO EMPTY GRASS CATCHER
Liftup on grasscatcher using the frame
handle.
Remove grasscatcher with clippingsfrom
under lawn mower handle.
Empty d'_opingsfrom bag using both frame
handle and bag handle.
NOTE: Do not drag the bag when emptying;
itwillcause unnecessary wear.
/
BEFORE STARTING ENGINE__
OIL
Your lawn mower is shipped withoutoilinthe
engine.
Be sure mower is leveland area around oil
fillis dean.
Remove engine oilcap w/dipstickand fill to
the full lineon the dipstick.
Use 20 ozs. of oil. For type and grade of oil
to use, see =ENGINE" in Maintenance
sectionof this manual.
Pour oilslowly. Do notover fill.
Check oillevel before each use. Add oilif
needed. Fillto full line on dipstick.
To read properlevel, tighten engine oilcap
each time.
Reinstallengine oilcap and tighten.
7