Filter
Top Products
ENGINE SPEED
Your engine speed has been factory set
Do not attempt to increase engine speed
or it may result in personal injury, If you
believe that the engine is running too fast
or too slow, take your lawn mower to an
authorized service center for repair and
adjustment
CARBURETOR
Your carburetor has a non-adjustable fixed
main jet for mixture control, If your engine
does not operate properly due to sus-
pected carburetor problems, take your
lawn mower to an authorized service
center for repair and/or adjustment
TO ASSEMBLE GRASS CATCHER
o Insert leg of tubular frame through front
opening of grass catcher and thread
frame into sewn hem of bag.
NOTE: Keep bag hem gathered on the
straight leg of the tubular frame,
o When frame comes out the other end of
sewn hem, immediately work the end of
frame down inside the bag as shown in
inset,
o Slide sewn hem evenly around the
tubular frame until both ends of frame
are exposed out of the front opening.
o Assemble lower frame to tubular frame
as shown. Be sure handle is outside of
bag and frames are fully seated as
shown in inset.
• Slip vinyl bindings over frame.
NOTE: tf vinyl bindings are too stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using
o Close the flip lid. Flip lid must be closed
while operating lawn mower,
CAUTION: Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear door
removed or propped open
Tubular frame Sewn
Sewn hem Flip lid
Lower frame
.-" _ must be
,..." fully
seated)
Tabular frame
Lower frame handle
\
Jny,
bindings
15