Filter
Top Products
Engine Pulley
St ....
ud C.,
Belt Guide "A".
Clip Screw
Drive Control Cable
sion
idler Pulley
Extension Spring rension
Pulley
IINE REPLACEMENT °
_CAUTION: Tines are sharp. Wear
)loves or other protection when handling
rines.
_,badly worn tine causes your tiller to work
larder and dig more shallow. Most impor-
ant, worn tines cannot chop and shred
)rganic matter as effectively nor bury it as
_eeply as good tines. A tine this worn °
leeds to be replaced.
,_ewTine
in_
To maintain the superb tilling perfor-
mance of this machine the tines should
be checked for sharpness, wear, and
bending, particularly the tines which are
next to the transmission. If the gap
between the tines exceeds 3-1/2 inches
they should be replaced or straightened
as necessary.
New tines should be assembled. Sharp-
ened tine edges will rotate rearward
from above.
I I
} I
t
3-1/2" Max _
:ounter Tine
otation
Sharp Edge
Hairpin Clip
Sharp Egde
larp Edge
Shear Pin
Shear Pin
17