Craftsman 917.292394 Tiller User Manual


 
° Never attempt to make any adjust-
ments while the engine (motor) is
running (except where specifically
recommended by manufacturer).
OPERATION
Do not put hands or feet near or under
rotating parts.
Exercise extreme caution when
operating on or crossing gravel drives,
walks, or roads. Stay alert for hidden
hazards or traffic. Do not carry passen-
gers.
After striking a foreign object, stop the
engine (motor), remove the wire from
the spark plug, thoroughly inspect the
tiller for any damage, and repair the
damage before restarting and operat-
ing the tiller.
Exercise caution to avoid slipping or
falling.
If the unit should start to vibrate
abnormally, stop the engine (motor)
and check immediately for the cause.
Vibration is generally a warning of
trouble.
Stop the engine (motor) when leaving
the operating position.
Take all possible precautions when
leaving the machine unattended.
Disengage the tines, shift into neutral,
and stop the engine.
Before cleaning, repairing, or inspect-
ing, shut off the engine and make
certain all moving parts have stopped.
Disconnect the spark plug wire, and
keep the wire away from the plug to
prevent accidental starting. Disconnect
the cord on electric motors.
Do not run the engine indoors; exhaust
fumes are dangerous.
° Never operate the tiller without proper
guards, plates, or other safety protec-
tive devices in place.
Keep children and pets away.
Do not overload the machine capacity
by attempting to till too deep at too fast
a rate.
Never operate the machine at high
speeds on slippery surfaces. Look
behind and use care when backing.
Never allow bystanders near the unit.
Use only attachments and accessories
approved by the manufacturer of the
tiller.
Never operate the tiller without good
visibility or light.
Be careful when tilling in hard ground.
The tines may catch in the ground and
propel the tiller forward. If this occurs,
let go of the handlebars and do not
restrain the machine.
MAINTENANCE ANDSTORAGE
Keep machine, attachments, and
accessories in safe working condition.
Check shear pins, engine mounting
bolts, and other bolts at frequent
intervals for proper tightness to be sure
the equipment is in safe working
condition.
Never store the machine with fuel in the
fuel tank inside a building where
ignition sources are present, such as
hot water and space heaters, clothes
dryers, and the like. Allow the engine to
cool before storing in any enclosure.
Always refer to the operator's guide
instructions for important details if the
tiller is to be stored for an extended
period.
_,Look for this symbol to point out
important safety precautions. It means
CAUTION!!! BECOMEAWARE!!! YOUR
SAFETY IS INVOLVED.
_,CAUTION: Always disconnect spark
plug wire and place wire where it cannot
contact spark plug in order to prevent
accidental starting when setting up,
transporting, adjusting or making repairs.
_I_WARNING: The engine exhuast from
this product contains chemicals known to
the State of California to cause cancer,
birth defects or other reproductive harm.
3