Filter
Top Products
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
i
PROBLEM iCAUSE CORRECTION
Headlight(s) not
working
(if so equipped)
Battery will not
charge
Loss of drive
Engine "backfires"
when turning
engine "OFF"
Engine dies when
tractor is shifted
into reverse
1
2
3
4
5
1
2
3
4
1
Light switch is "OFF".
Bulb(s) or lamp(s) burned out.
Faulty light switch.
Loose or damaged wiring.
Blown fuse.
Bad battery cell(s).
Poor cable connections.
Faulty regulator (if so equipped).
Faulty alternator.
Freewheel control in
"DISENGAGED" position.
Debris on steering plate (if
equipped).
Motion drive belt worn, damaged,
or broken.
i ,
i Air trapped in transmission during
I shipment or servicing.
i , ,
i Axle key missing.
Engine throttle control not sel 1
between half and full speed (fast)
position before stopping engine.
Reverse operation system (ROS) 1
is not "ON" while mower or other
attachment is engaged.
1 Turn light switch "ON".
2 Replace bulb(s) or lamp(s).
3 Check/replace light switch.
4 Check wiring and connections.
5 Replace fuse.
1 Replace battery.
2 Check/clean all connections.
3 Replace regulator.
4 Replace alternator.
1 Place freewheel control in
"ENGAGED" position.
2 See "CLEANING" in the
maintenance section.
3 Replace motion drive belt.
4 Purge transmission.
Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
Move throttle control between
half and full speed (fast) position
before stopping engine.
Turn ignition key to ROS "ON"
position. See Operation section.
o Find this and all your other product manuals online.
o Get answers from our team of home experts.
o Get a personalized maintenance plan for your home,
o Find information and tools to help with home projects.
brought to you _'_ySears
30